以诚信为原则，以客户为核心，以用户满意为宗旨
品质保障，渠道正规，互利共赢
SimpliMet 3000 热压镶嵌机
    发布时间: 2017-03-18 21:15    

该款通用热压镶嵌机适用于具有多种镶嵌样需求的实验室用户。采用预编程记录各种镶嵌方法，可对不同尺寸的镶嵌样进行重复制作。

SimpliMet 3000 热压镶嵌机

可编程性降低复杂性

• 适用于有多种镶嵌样需求且镶嵌尺寸不同的实验室。

• 存储和撤销9种不同的程序，降低复杂性和消除错误， 提供灵活性来满足多变的实验室要求

• 通过选择不同尺寸的模具来优化各种各样的试样大小。节约镶嵌介质并提升镶嵌质量


产品规格

Specifications  
Operation Automatic electro-hydraulic
Power Source 85-264VAC, 50/60Hz, 1 phase
Molding Pressure 1200 - 4400psi [80 - 300bar] in 100psi [5bar] increments
Molding Temperature 120 - 360°F [50 - 80°C] in 20°F [10°C] increments
Heating Power 1500Watt @ 115/230VAC
Heating Time 0 - 20 minutes in 10 second increments
Cooling Time 0 - 30 minutes in 10 second increments
Mold Type Cylindrical, including upper and lower rams and duplex mold spacer
Closure Type Insluated bayonet with piston indent
Mold Diameters 1in, 1.25in, 1.5in, 2in, 25mm, 30mm, 40mm, 50mm
Touch-pad Controls On/Off; Heat Time; Cool Time; Molding Temperature; Molding Pressure; Mold Size; Ram Up/Down; Maunal Cool; Cycle Start; Cylinder Open; Unit of Measure; Language and also including Thermoplastic; Load and Save Methods
Units of Measure Imperial or Metric
Water Flow Rate 0.5gal/min [2ℓ/min] minimum
Water Pressure 45-75psi [3-5bar]
Control Voltage 24VDC
Method Programmability 4 Buehler, Preprogrammed Methods per mold size; 25 User Definable Methods
Preload Pressure 0 - 400psi [0 - 30bar] in 50psi [5bar] increments
Thermoplastic Function Automatically sets correct parameters for thermoplastic resins such as TransOptic™ and cools the mount in a controlled, linear fashion
Compliance In accordance with EC Directives